The Symbols On Your Dvd Recorder Display - Philips DVDR 615/17 User Manual

Output jacks (OUT 1 480p/480i)
AUDIO OUT
Analog audio output (red/white jack): Connection for an additional
device. Audio output for component video/progressive scan
COMPONENT
Component video output (red/blue/green jack): Connection for
VIDEO Y PB PR
an additional device with component video/progressive scan output
OUT
Output jack (DIGITAL AUDIO OUT)
DIGITAL AUDIO
Digital audio output: Connection for a digital audio device
OUT
(amplifier/receiver)
The symbols on your DVD Recorder
display
The following symbols may appear on your DVD Recorder display:
Multifunction display/text line
•) Clock
•) Disc/Title play time
•) OTR time
•) Title name
•) Display of the TV channel number / playing time / function.
•) Display of information, warnings
IIIIIIIIIIIIIII
Disc bar: Displays the current position on the disc (disc pointer).
Play/Record: single flashing segment at the current position.
Pause: flashing segment on both sides of the current position.
Stop: flashing segment at the current position.
TIMER
A recording (Timer) has been programmed
TV
Modulator is switched off . The antenna signal (RF signal) is only
connected to the TV when the modulator is switched off.
PRO
Component Video output set to 'Progressive Scan.' If this is not
displayed, the Component Video output is set to 'Interlaced.'
o(((
Remote control command has been sent
SAP
Secondary audio program from the tuner is selected