Programmable Keys; Connecting Accessories - Motorola VC5090 Quick Reference Manual

24
Performing a Warm Boot
A warm boot restarts the vehicle computer and saves all stored records
and entries.
Files that remain open during a warm boot may not be retained.
NOTE
To perform a warm boot, press the Power button and the P2 button
simultaneously and release.
Performing a Cold Boot
A cold boot restarts the vehicle computer, but erases all stored records
and entries in RAM. Data saved in flash memory or a memory card is not
lost. In addition it returns formats, preferences and other settings to the
factory default settings. There are two ways to perform a cold boot:
• Simultaneously press and hold the Power, P1 and P3 buttons.
• Turn off the Main Power switch on the top of the vehicle computer,
press the Power, P1 and P3 buttons simultaneously then turn the
Main Power switch to the on position.

Programmable Keys

The programmable keys on the Quick Access Panel (P1, P2, P3) can be
set to perform certain functions, such as switching between applications
or emulator sessions.
To set a programmable key:
1.
From the Start menu, select
Programmable Keys
2.
Select the
Key:
3.
In the drop-down list, select the key to program.
Action
4.
In the
perform.
Tap OK.
5.

Connecting Accessories

Connect an optional scanner, ActiveSync serial or USB cable, audio or
USB device using the appropriate connector on the bottom of the
VC5090. Cables are available from Motorola.
drop-down list, select the function to assign to the key to
Settings Control Panel
>
icon.
VC5090 Vehicle Computer
.