Table of Contents
Advertisement
5.6
Power menu
Main
Advanced
ACPI APIC support
APM Configuration
Hardware Monitor
5.6.1
ACPI APIC Support [Enabled]
Allows you to enable or disable the Advanced Configuration and Power Interface
(ACPI) support in the Advanced Programmable Interrupt Controller (APIC). When
set to [Enabled], the ACPI APIC table pointer is included in the RSDT pointer list.
Configuration options: [Disabled] [Enabled]
5.6.2
APM Configuration
APM Configuration
Restore on AC Power Loss
Power On By RTC Alarm
Power On By External Modems
Power On By PCI Devices
Power On By PCIE Devices
Restore on AC Power Loss [Last State]
When set to [Power Off], the system goes into off state after an AC power loss.
When set to [Power On], the system will reboot after an AC power loss. When set
to [Last State], the system goes into either off or on state, whatever the system
state was before the AC power loss.
Configuration options: [Power Off] [Power On] [Last State]
5-28
Server
[Enabled]
v02.61 (C)Copyright 1985-2009, American Megatrends, Inc.
[Last State]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
v02.61 (C)Copyright 1985-2009, American Megatrends, Inc.
BIOS SETUP UTILITY
Power
Boot
Tools
BIOS SETUP UTILITY
Power
Exit
Include ACPI APIC
table pointer to
RSDT pointer list.
Select Screen
←→
Select Item
↑↓
+-
Change Option
F1
General Help
F10
Save and Exit
ESC
Exit
<Enter> to select
whether or not to
restart the system
after AC power loss.
Select Screen
←→
Select Item
↑↓
+-
Change Option
F1
General Help
F10
Save and Exit
ESC
Exit
Chapter 5: BIOS setup
Advertisement
Table of Contents
