Usb Configuration - Asus RS300-E6 Series User Manual

Onboard LAN1/2 Boot ROM [PXE]
Allows you to configure the onboard LAN1/2 boot mode.
Configuration: [Disabled] [PXE] [iSCSI]
Serial Port1 Address [3F8/IRQ4]
Allows you to select the Serial Port1 base address.
Configuration options: [Disabled] [3F8/IRQ4] [3E8/IRQ4] [2E8/IRQ3]
Serial Port2 Address [2F8/IRQ3]
Allows you to select the Serial Port2 base address.
Configuration options: [Disabled] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3]
Interrupt 19 Capture [Enabled]
When set to [Enabled], this function allows the option ROMs to trap Interrupt 19.
Configuration options: [Disabled] [Enabled]
5.4.4 USB Configuration
Advanced

USB Configuration

Module Version - 2.24.3-13.4
USB Devices Enabled:
2 Hubs
USB Functions
Legacy USB Support
BIOS EHCI Hand-off
v02.61 (C)Copyright 1985-2008, American Megatrends, Inc.
USB Functions [Enabled]
Allows you to enabled or disable the USB function.
Configuration options: [Disabled] [Enabled]
Legacy USB Support [Enabled]
Allows you to enable or disable support for legacy USB devices. Setting to [Auto]
allows the system to detect the presence of USB devices at startup. If detected, the
USB controller legacy mode is enabled. If no USB device is detected, the legacy
USB support is disabled. Configuration options: [Disabled] [Enabled] [Auto]
ASUS RS300-E6 Series
BIOS SETUP UTILITY
[Enabled]
[Auto]
[Enabled]
Options
Disabled
Enabled
Select Screen
←→
Select Item
↑↓
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
5-21