Table of Contents
Advertisement
After returning to Japan
When you return to Japan, the terminal is
connected to DOCOMO network
automatically. If connection is failed, perform
the following operations.
Set "Network Mode" to "LTE (preferred)/
WCDMA/GSM". (P.220)
Set "Search mode" to "Automatic" in "Service
providers" settings. (P.219)
Making setting for
international use
When you start the international roaming or
move out of your operator's network, you
need to reconnect the terminal to another
available network.
❖ Information
Some applications automatically perform packet
communications. To disconnect packet
communication manually, from the Home screen,
tap
and Tap [Settings]
u
networks]
[Data enabled] to unmark.
u
u
[More...]
[Mobile
Confirming and switching the
network search mode
By default, network search mode is set to
"Automatic". When you connect manually to
an overseas network operator conducted in
flat-rate service, confirm the search mode
with the following operations and switch to
"Manual".
From the Home screen, tap
1
then tap
.
Tap [Call settings]
2
providers].
Tap [Search mode]
3
From "AVAILABLE NETWORKS",
4
tap a network to mark.
To display available networks, tap
[Search networks].
❖ Information
If you set a network manually, the terminal is not
reconnected to another network automatically even
if you move out of the network area.
To return to "Automatic", tap [Automatic] in
Step 3.
International roaming
,
u
[Service
u
[Manual].
219
Advertisement
Chapters
Table of Contents
