Miele G 7883 Operating Instructions Manual page 11

When using cleaning agents and
specialised products, it is essential
that the manufacturer's instructions are
followed. Chemicals must only be used
for the purpose they are designed for
and in the situation specifed, to the
exclusion of other chemicals, to avoid
such dangers as chemical reactions
and material damage.
The machine is designed for
operation with water and
recommended additive chemical
agents only. Organic solvents must not
be used in this machine, as there is the
danger under certain circumstances of
fire or explosion. Although this is not the
case with all organic solvents, other
problems could arise with their use, for
example damage to rubber and
synthetic materials.
In critical applications where very
stringent requirements have to be
met, it is strongly recommended that all
the relevant factors for the process,
such as cleaning agent, water quality
etc. are discussed with the Miele
Application Technology specialists.
If cleaning and rinsing results are
subject to particularly stringent
requirements (e.g. chemical analysis,
specialised industrial processes etc.), a
regular quality control test must be
carried out by the user to ensure that
the required standards of cleanliness
are being achieved.
Warning and Safety instructions
The special inserts should only be
used for the purpose they are
designed for. Hollow instruments must
be throughly cleaned, internally and
externally.
Empty any containers or utensils
before arranging them in the
machine.
Do not allow any remains of acids
or solvents, and in particular
hydrochloric acid or chloride solutions,
to get into the wash cabinet. Similarly
avoid any materials with a corrosive
effect.
The presence in compounds of any
solvents should be minimal (especially
those in hazard class A1).
Ensure that solutions or steam
containing hydrochloric acid do not
come into contact with the steel outer
casing of the machine, to avoid any
corrosion damage.
Please follow the advice on
installation in these instructions
and the separate Installation
Instructions.
11