Tool Use And Care; Service; Specific Safety Information; Tool Safety - RIDGID 5228 Operator's Manual

5228 Double Insulated Variable Speed, Dual Action Reciprocating Saw

Tool Use and Care

1. Use clamp or other practical way to secure and
support the workpiece to a stable platform. Holding
the work by hand or against your body is unstable and
may lead to loss of control.
2. Do not force tool. Use the correct tool for your ap-
plication. The correct tool will do the job better and
safer at the rate for which it is designed.
3. Do not use tool if switch does not turn it ON or
OFF. Any tool that cannot be controlled with the
switch is dangerous and must be repaired.
4. Disconnect plug from the power source before
making any adjustments, changing accessories,
or storing the tool. Such preventive safety mea-
sures reduce risk of starting tool accidentally.
5. Store idle tools out of the reach of children and
other untrained persons. Tools are dangerous in the
hands of untrained users.
6. Maintain tools with care. Keep cutting tools sharp
and clean. Properly maintained tools with sharp cut-
ting edges are less likely to bind and are easier to
control.
7. Check for misalignment or binding of moving
parts, breakage of parts, and any other condition
that may affect the tools operation. If damaged,
have the tool serviced before using. Many accidents
are caused by poorly maintained tools.
8. Use only accessories that are recommended by
the manufacturer for your model. Accessories that
may be suitable for one tool may become hazardous
when used on another tool.
9. Inspect tool and extension cords periodically and
replace if damaged. Damaged cords increase the
risk of electrical shock.
10. Keep handles dry and clean; free from oil and
grease. This allows for better control of the tool.
11. Store tools in dry place. Such measures reduce
the risk of electrical shock.

Service

1. Tool service must be performed only by qualified
repair personnel. Service or maintenance performed
by unqualified repair personnel could result in injury.
2. When servicing a tool, use only identical replace-
ment parts. Follow instructions in the Maintenance
Section of this manual. Use of unauthorized parts or
failure to follow maintenance instructions may create
a risk of electrical shock or injury.
Ridge Tool Company • Elyria, Ohio • U.S.A.
3. Follow instructions for lubricating and changing
accessories. Accidents are caused by poorly main-
tained tools.

Specific Safety Information

The Operator's Manual contains specific safety infor-
mation and instructions for your protection against serious
injuries including:
• Electrical shock or burns from contact with wires,
motor or other power drive parts;
• Eye injuries, including being blinded by the workpiece
or workpiece chips.
Read and follow safety labels on machine!
Know the location and functions
of all controls before using this tool.
WARNING
Eye injuries can occur from thrown workpiece chips.
• Wear safety glasses or safety shield.
• Keep switch in working order.
• Do not use tool with damaged or worn electrical
cords.
• Do not use damaged saw blades.
READ ABOVE WARNING CAREFULLY!

Tool Safety

1. Do not alter or misuse tool. Other uses may in-
crease the risk of injury.
2. Position electric cord clear of saw blade. Damaged
cord can cause electrical shock.
3. Do not reach across the saw or wear loose cloth
gloves. May become entangled in the tool causing se-
rious injury.
4. Do not use dull or damaged saw blades. Less
likely to bind and lose control.
3