Table of Contents
Advertisement
Available languages
Available languages
SAVE THESE
INSTRUCTIONS.
This appliance is intended for commercial use.
ADDITIONAL SAFETY RULES
1.
Read this instruction manual and the charger
instruction manual carefully before use.
2.
Do not pick up the following materials:
−
Hot materials such as lit cigarettes or
spark/metal
grinding/cutting metal
−
Flammable materials such as gasoline,
thinner, benzine, kerosene or paint
−
Explosive materials like nitroglycerin
−
Ignitible materials such as Aluminum, zinc,
magnesium,
celluloid
−
Wet dirt, water, oil or the like
−
Hard pieces with sharp edges, such as
wood chips, metals, stones, glasses, nails,
pins or razors
−
Powder to clot such as cement or tonor
−
Conductive dust such as metal or carbon
−
Fine particle like concrete dust
Such action may cause fire, injury and/or
property damage.
3.
Stop operation immediately if you notice
anything abnormal.
4.
If you drop or strike the cleaner, check it
carefully
for
operation.
5.
Do not bring close to stoves or other heat
sources.
6.
Do not block the intake hole or vent holes.
7.
When using the cleaner as a blower
always use protective goggles, a cap and
•
mask while operating;
always be sure that the cleaner is switched
•
off and the battery cartridge is removed
before clearing a blockage;
always be sure of your footing on slopes;
•
walk, never run;
•
never point the nozzle at anyone in the
•
vicinity;
Keep all nuts, bolts and screws tight to be
•
sure the cleaner is in safe working
condition;
Store the cleaner only in a dry place;
•
The operator or user is responsible for
•
accidents or hazzards ocurring to other
people or their property.
dust
generated
titanium,
phosphorus
cracks
or
damage
SAVE THESE INSTRUCTIONS.
Symbols
The followings show the symbols used for tool.
USB103-1
IMPORTANT SAFETY
INSTRUCTIONS
by
FOR BATTERY CARTRIDGE
1.
Before using battery cartridge, read all
instructions and cautionary markings on (1)
battery charger, (2) battery, and (3) product
using battery.
or
2.
Do not disassemble battery cartridge.
3.
If operating time has become excessively
shorter, stop operating immediately. It may
result in a risk of overheating, possible burns
and even an explosion.
4.
If electrolyte gets into your eyes, rinse them
out with clear water and seek medical
attention right away. It may result in loss of
your eyesight.
5.
Do not short the battery cartridge:
(1)
(2)
before
(3)
A battery short can cause a large current flow,
overheating, possible burns and even a
breakdown.
6.
Do not store the tool and battery cartridge in
locations where the temperature may reach or
exceed 50 ﾟ C (122 ﾟ F).
7.
Do not incinerate the battery cartridge even if
it is severely damaged or is completely worn
out. The battery cartridge can explode in a fire.
8.
Be careful not to drop or strike battery.
9.
Do not use a damaged battery.
SAVE THESE INSTRUCTIONS.
Tips for maintaining maximum battery life
1.
Charge
completely discharged.
Always stop tool operation and charge the
3
･
volts
･
direct current
Do not touch the terminals with any
conductive material.
Avoid storing battery cartridge in a
container with other metal objects such as
nails, coins, etc.
Do not expose battery cartridge to water
or rain.
the
battery
USD305-1
ENC007-6
cartridge
before
Advertisement
Table of Contents
