Using The Recorder - GE 3-5377 User Manual

Using the Recorder

Insert or Remove a Microcassette
1. Press the STOP EJECT button to stop recorder or to open cassette carry
door and remove microcassette. Note that when in play or record
mode you must press STOP EJECT once to turn player off and again to
open the cassette carry door.
2. Insert microcassette into the cassette carry door with the side to be
used visible through cassette door window. Face exposed tape outward
and close door. Note that Rim drive and capstan drive tapes look alike,
but only CAPSTAN DRIVE MICROCASSETTE tapes will work in this
recorder.
TIP: Always push STOP EJECT
This will relieve pressure on certain parts in the
recorder that might deform after long periods of time.
Headphone jack
Volume Control
• Adjust the volume when in the PLAY mode to your preferred listening
level.
• Adjust the volume when in the RECORD mode to fine tune the
sensitivity of the built-in microphone for record operations.
STOP EJECT STOP EJECT button before storing. STOP EJECT
STOP EJECT
1/2 • • NORMAL
Tape speed switch
External MIC jack
Volume
VOLUME
Tape buttons
AVR switch
Mic sensitivity switch
HI • • LO
MIC
REC/
BATT
OFF • • ON
5