With Audio Equipment - GE TV User Manual

Using Your TV and Remote
With Audio Equipment: Programming and Basic Operation
Refer to the Connection Book or your Audio equipment owner's manual to hook
up your audio equipment. Your remote controls only RCA audio equipment
such as a radio, CD player, tape player, turntable, or amplifier. The
remote may need to be programmed for your equipment, but may not
operate all models of the brands listed below. Use the codes below or on the
sheet packed in with your remote.
Program the remote for
audio equipment
Basic Operation
Audio Codes
RCA/ Dimensia
AM/FM...........................03
CD ....................................07
Tape .................................06
Phono ..............................05
Aux ..................................04
REW PLAY FF
REC STOP PAUSE
DISPLAY SKIP
CHAN
VOL VOL
CHAN
MUTE PREV CH
1 2 3
4 5 6
7 8 9
INPUT ANTENNA
0
MENU•PROG
CLEAR RESET
MOVE
A. Point the remote at the audio
equipment and hold AUDIO.
B. Enter the code from the code list.
C. Release AUDIO.
D. Press POWER to turn it on. If
nothing happens, try pressing
AUDIO and then POWER.
E. Repeat A–D with another code
if the first one does not work.
A. Point the remote at the audio
equipment and hold AUDIO.
B. Press POWER to turn it on.
C. Use the buttons on the remote
that relate to audio functions.
Not all buttons highlighted
may work with your equipment.
D. Turn the audio equipment off
using the audio component's
power off button.
15