With A Satellite Receiver - GE TV User Manual

Using Your TV and Remote
With a Satellite Receiver: Basic Operation
You can also use the TV's remote with satellite receivers. Refer to your
Satellite Receiver owner's manual to hook up your Satellite Receiver. The
remote may need to be programmed for other brands of satellite receivers,
but may not operate all models of the brands listed below. Use the codes
below or on the sheet packed in with your remote.
Follow the instructions below for basic operation of your receiver. You
may also want to experiment with other buttons on the remote to see if
they work with your receiver.
Program the remote for your
Satellite Receiver
Turn on the
Satellite Receiver
Turn off the
Satellite Receiver
Satellite Receiver Codes
Chaparral ..........................80,81
Cheyenne ...............................81
Drake .................................82,83
DSS..........................................00
GE............................................00
General Instruments...92,93,94
ProScan...................................00
RCA.........................................00
Realistic ..................................84
Sierra I,II,III............................81
STS1.........................................85
STS2.........................................86
STS3.........................................87
STS4.........................................88
Toshiba ...................................89
Uniden....................................90
Video Cipher II......................91
REW PLAY FF
REC STOP PAUSE
DISPLAY SKIP
CHAN
VOL VOL
CHAN
MUTE PREV CH
1 2 3
4 5 6
7 8 9
INPUT ANTENNA
0
MENU•PROG
CLEAR RESET
MOVE
A. Point the remote at the satellite
receiver and hold SAT•CABLE.
B. Enter the code for your brand
from the code list below.
C. Release SAT•CABLE.
D. Press POWER. If nothing
happens, try pressing
SAT•CABLE and then POWER.
A. Press SAT•CABLE to set
the remote to control the satel-
lite receiver.
B. Press POWER to turn on the
receiver if it did not turn on
when you pressed SAT•CABLE.
A. Press SAT•CABLE to set the
remote to control the satellite
receiver.
B. Press POWER to turn off
the receiver.
11