Saving And Restoring Rcs Configurations And Rcs User Databases - Dell Remote Console Switch User Manual

3 Select one of the following methods from which to load the firmware
file: Filesystem, TFTP, FTP, or HTTP.
NOTE: The Filesystem option is only available on the remote OBWI.
4 If you selected Filesystem, select Browse to specify the location of the
firmware upgrade file.
-or-
If you selected TFTP, enter the Server IP Address and Firmware File
you wish to load.
-or-
If you selected FTP or HTTP, enter the Server IP Address and
Firmware File you wish to load, as well as the User Name and User
Password.
5 Click Upgrade.
Saving and Restoring RCS Configurations and RCS User
Databases
You may save the switch configuration to a file. The configuration file will
contain information about the managed appliance. You may also save the local
user database on the switch. After saving either file, you may also restore a
previously saved configuration file or local user database file to the switch.
To save a managed appliance configuration or user database of a managed
appliance:
1 From the side navigation bar, click the Unit View - RCS - Files tab.
2 Click either the RCS Configuration tab or the User Database tab, then
click the Save tab.
3 Select the file save method: Filesystem, TFTP, FTP, or HTTP PUT.
4 If you selected TFTP, enter the Server IP Address and Firmware Filename
you wish to load.
-or-
Local and Remote Configuration
xxx | xxx
53