53 F"An-) Audio Dubbing - Canon ZR 900 Instruction Manual

,..~)
Audio Dubbing
You can add sound to a recording using
the built-in or an external microphone.
I I~Y'1
•. '•..... at> .••••
([IJ 21)
POINTS TO CHECK
You can only dub audio on tapes recorded
in SP mode with [mm 12bit] audio
([IJ 41). This function is operated with the
wireless controller.
I~I
5
Press
I
STop-l
to stop dubbing.
o
IMPORTANT
• Audio dubbing will stop if the tape has a
blank section or a section recorded in
LP mode or [mmJ 16bit] audio.
• The quality of the dubbed sound will not
be as good when dubbing audio to a
tape that was not recorded with this
camcorder or after having dubbed audio
over the same scene more than 3 times.
CD
NOTES
PAUSE II
•
AUDIO DUB.
-
You can connect the camcorder to a TV to
check the picture on the TV screen and
check the sound through headphones
connected to the TV.
~
To
SELECT THE AUDIO TRACK FOR PLAYBACK
.t;f
~i
You can select the audio track that will
be played when playing back a tape
that was audio dubbed (QJ 42).
I
1
Locate the point where you want
to start dubbing audio.
Before locating the starting point,
you can also set the zero set
memory (CD 35) at the point where
you want the audio dubbing to end.
The camcorder will automatically
stop audio dubbing at that point.
2
Start playback and immediately
press
[PAUSE II].
3
Press
[AUDIO DUB.).
"AUDIO DUB." and
=
II appear.
4
Press
[PAUSE II]
to begin dubbing.
Speak into the microphone.
53