Locating The End Of The Last Scene; On-Screen Displays (Data Code) - Canon ZR 900 Instruction Manual

Video
Locating the End of the Last Scene On-Screen Displays (Data Code)
After playing back a tape, use this
function to locate the end of the last
scene recorded in order to continue
recording from that point.
The camcorder keeps a data code
containing the date and time of
recording. You can select the data to be
displayed.
(CD 21)
POINTS TO CHECK
Options
• Default value
Stop the playback before using this
function.
CD
NOTES
Displays both the date and time of the recording.
[FUNC.]
E)
[13
MENU]
C
[II] DISPLAY SETUP/@] E)
[DATA CODE]
0
Desired option E)
[FUNC.]
FUNC.
( [l]
22)
FUNC.
e
• End search cannot be used once you
remove the cassette.
• If there are blank sections between
recordings, the end search may not
work correctly.
• ,..ajI.J You cannot use the end search
to locate the end of a scene that was
audio dubbed.
[FUNC.]
€)
[~I
END SEARCH]
C
[EXECUTE]
• "END SEARCH" appears.
• The camcorder rewinds/fast forwards
the tape, plays back the last few
seconds of the recording and stops
the tape.
• To cancel the end search push the
joystick
(~)
toward • .
FUNC.
( [l]
22)
36