AEG AR 4023 DVD Instruction Manual page 23

Illustration 1: Remote Control
1 PLAY/PAUSE:
CD/MP3/DVD mode: Starting playback, stopping
picture/track.
2 : To switch off the sound.
3 TITLE:
To show the title menu of the DVD (depending on the
DVD).
4 SUB-T: For changing the subtitle languages in DVD
mode (if available).
SETUP: To start the setup menu.
5
ANGLE: To select the viewing angle (if available).
6
7 SLOW: Slow motion. Film continues playing with the
" " button.
ZOOM: For zooming in and out in DVD Mode.
8
SEL:
9
Radio Mode:
Select sound/picture mode.
10 AUDIO: DVD Mode: Change audio languages
(depending on the DVD).
11 Numerical buttons:
a) Radio Mode:
- Press briefly (0-6): Station selection.
- Press longer (0-6): Station storage.
b) CD/MP3/DVD mode:
For direct selection of chapter or song number.
12 GOTO: For direct accessing of a section on the CD/
DVD.
13 10+: for selecting the chapters/tracks above 9. Press-
ing again increases by a further 10.
14 OSD: CD/MP3/DVD Mode: Switching the display.
15 PBC: Activate/deactivate Playback Control with VCD.
16 VOL +/-: To increase/reduce the volume.
SEEK+/ : Radio mode: Manual channel Search. CD/
MP3/DVD Mode: To jump to the next chapter or song.
SEEK-/ : Radio mode: Manual Station Search. CD/
MP3/DVD Mode: To return to the previous chapter or
song.
17 RDM: In CD/MP3/DVD Mode: Random playback.
18 AMS/RPT:
a) Radio Mode:
- Press briefly: Automatic Station Search.
- Press longer: Automatic station storage.
b) DVD Mode: To repeat title, chapters, etc.
19 ST/PROG:
a) Radio Mode: Stereo/Mono switching.
b) CD/MP3/DVD Mode: Display Playlist.
20 : Stop play.
21 Cursor buttons:
DVD mode: Navigation in screen menu.
22 ENTER: Confirming the input.
23 BND/SYS:
a) Radio Mode: Switching the 3 FM and 2 MW
levels.
b) CD/MP3/DVD mode: AUTO/NTSC/PAL Colour
system switch.
24 : To activate standby mode.
25 MODE: Operating mode selection
(CD/DVD, AV, Radio etc.).
Illustration 2: Control Panel - see Operation.
ENGLISH
23