Remote Control - Pioneer A-307R Operating Instructions Manual

Stereo amplifier
Hide thumbs Also See for A-307R:
Table of Contents

Advertisement

Available languages

Available languages

REMOTE CONTROL

LOADING BATTERIES
Open the battery compartment cover on the back of the
remote control unit.
Insert size AA/R6P dry cell batteries into the battery
compartment in accordance with the indications (ª , ·)
inside the compartment.
Close the cover of the battery case.
Incorrect use of batteries may lead to leakage or
rupture. Always be sure to follow these guidelines:
1. Always insert batteries into the battery compartment
correctly matching the positive ª and the negative ·
polarities as indicated inside the compartment.
2. Never mix new and used batteries.
3. Batteries of the same size may have different voltages
depending on their type. Do not mix different types of
batteries.
NOTE:
When disposing of used batteries, please comply with
governmental regulations or environmental public instruction's
rules that apply in your country or area.
·
ª
ª
·
RANGE OF REMOTE CONTROL
When the remote control unit is pointed at the remote sensor
window on the stereo amplifier and any of its buttons is
pressed, the unit and other components can be operated by
remote control.
Distance : Within a range of approx. 7 meters from the unit's
Angle
÷ The accessory remote control unit can be used to control
Remote control sensor window
30
30
7 m
remote control sensor window.
: Within approx. 30 degrees from the center of the
unit's remote control sensor window.
Remote control will not be possible if there is an
obstacle between the remote control unit itself
and the unit's remote control sensor window.
some functions of other Pioneer cassette decks, CD players
and tuners (only those Pioneer components bearing the Î
mark).
11

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents