Remote Control Unit - Pioneer SP-X707 Operating Instructions Manual

TAPE MONITOR
indicator
POWER indicator
REMOTE SENSOR indicator
srereu mawore ay
CONTA,
STAND-BY indicator
will be output yet.
To turn off the unit, press this switch once more.
@POWER switch
@® VOLUME switches
Use these to adjust the volume.
{+]: This turns the volume up.
{-]: This turns the volume down.
@® MUTING switch
Use this switch to temporarily cut off all the sound.
@ REMOTE SENSOR
Qo
REMOTE CONTROL UNIT
LOUDNESS switch
Use this switch when listening to
sound at a low volume. The switch
is ON when ''LOUDNESS"' on the
operating mode display lights. In this
mode, the bass and treble are boost-
ed and the sound takes on an extra
"punch" even at low volume levels.
POWER switch
Turns power to the SP-X707 ON/OFF.
SURROUND ON/OFF switch
Turns surround ON/OFF.
MUTING switch
Use to temporarily cut off all sound.
SUPER BASS SWITCH
Press this switch to enjoy empha-
sized bass sound. Pressing it once
again turns this function off.
MASTER VOLUME LEVEL
contro}
Use these to adjust the volume.
(+]: This press the volume up.
[-]: This press the volume down,
orange.
SURROUND VOLUME
LEVEL control
The level indicator illuminates
in red.
NOTE;
The SURROUND switch must be ON
for these controls to work.
BALANCE switches
Normally, the BALANCE indication
on the operating mode display is
kept at its center position (setting is
made here by pressing CENTER).
Adjust these switches when the vol-
The level indicator illuminates in
(—MasTen ~~]
VOLUME LEVEL
W) PIONEER
REMOTE CONTROL UNIT
Cu.SPxOO1
og
SURROUND MODE
SELECTOR
By depressing these switches, 4
different surround sound effects can
be selected.
O00 SURROUND:
This position is specially designed
for watching movies on TV, partic-
ularly video tapes marked with the
symbol, or those having the symbo!
shown at the end of the movie, in-
dicating that the soundtrack was
recorded using * Dolby noise reduc-
tion. The SP-X707 contains a
decoder designed to work with
Dolby surround sources. The
decoder works to reproduce sound
with all the impact and presence of
a movie theater, in your own home.
THEATER:
When listening to a movie music
source with this switch position,
you are treated to music sound like
that enjoyed from a seat in a con-
cert hall.
STADIUM:
Depress this switch when listening
to live sports broadcasts, etc. The
resulting sound will make you think
you are sitting right in the stadium.
SIMULATED STEREO:
Depress this switch when using a
monaural sound source. A_ full-
breadth of rich sound can be
enjoyed.
EXPANDER switch
Set to this switch when not using
the rear surround speakers in order
to produce surround effects from
the front speakers alone. In this
way, you can enjoy sound with a
natural breadth and an added sense
of depth without spoiling the impor-
tant sound image placement. The
surround effect can be adjusted by
using the surround volume control.
ume tends to be louder at the left or
right. If it is too loud at the right,
press L; if it is too loud at the left,
press R.
remote control units.
*
Manufactured under license from Dolby Laboratories Licensing Cor-
poration. Additionally licensed under one or more of the following
patents: U.S. numbers 3,632,886, 3,746,792 and 3,959,590;
CANADA numbers 1,004,603 and 1,037,877. "Dotby" and the
double-D symbol! are trademarks of Dolby Laboratories Licensing
Corporation.
The Loudness, Super Bass, and Expander functions cannot all be used together. The Expander cannot be used together
with Dolby surround. Also, the loudness function does not work with surround output and "output fixed (FIX)"".
g
8
<ARE1016>
<ARE1016>