Compliance With Regulations; General; Fcc And Etsi Compliance Testing - Motorola PTP 500 Series User Manual

1.9

Compliance with Regulations

1.9.1 General

Changes or modifications not expressly approved by Motorola could void the user's authority
to operate the system.
This system has achieved Type Approval in various countries around the world. This means
that the system has been tested against various local technical regulations and found to
comply. The frequency bands in which the system operates may be 'unlicensed' and, in these
bands, the system can be used provided it does not cause interference. Further, it is not
guaranteed protection against interference from other products and installations.
CAUTION
When planning a link that will use Connectorized PTP 500 Series bridges (with
external antennas), ensure that regulatory requirements are met for the installation,
as described in Section 10.5 "Regulatory Issues with Connectorized Units".

1.9.2 FCC and ETSI Compliance Testing

The system has been tested for compliance to both US (FCC) and European (ETSI)
specifications. It has been shown to comply with the limits for emitted spurious radiation for a
Class B digital device, pursuant to Part 15 of the FCC Rules in the USA and appropriate
European ENs. These limits have been designed to provide reasonable protection against
harmful interference. However the equipment can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to
other radio communications. There is no guarantee that interference will not occur in a
particular installation.
NOTE
A Class B Digital Device is a device that is marketed for use in a residential
environment,
environments.
notwithstanding use
10
1 About This User Guide
in commercial, business and industrial