Makita 9526NB Instruction Manual page 5

Installing the wheel guard
I
Mount the wheel guard with the tab on the wheel guard band aligned with the notch on
the bearing box. Then rotate the wheel guard
180"
clockwise (fo; 9526NB) or counter-
clockwise (for 9527NB and 9528NB). Be sure to tighten the screws securely.
9526NB
I
Installing side grip (auxiliary handle)
For 9527NB and 9528NB only
Screw the side grip on the tool securely.
The side grip can be installed on either side
of the tool, whichever is convenient.
3527NB. 9528NB
,--Wheel guard
I
Installing or removing the depressed center wheel
CAUTION:
Always be sure that the tool is switched off and unplugged before installing or removing
the wheel.
Mount the inner flange onto the spindle. Fit the wheel on over the inner flange and screw
the lock nut onto the spindle.
9527NB
9528NB
Lock
nut
- a 9526NB
?---
Lock nut
Depressed
center wheel
@-inner flange