Compliance Information - Cisco Explorer 1840 User Manual

Compliance Information

United States FCC Compliance
This equipment has been tested and found to comply
with the applicable limits of Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may
cause harmful interference to radio or TV reception,
which can be determined by turning the equipment off
and on. The user is encouraged to try to correct the
interference by one or more of the following mea-
sures:
• Increase the separation between the
equipment and receiver
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is con-
nected
• Consult your cable company or an experienced
radio/TV technician for help
Any changes or modifi cations not expressly
approved by Cisco could void the user's
authority to operate the equipment.
Important: The information shown in the FCC
Declaration of Conformity paragraph below is a
requirement of the FCC and is intended to supply you
with information regarding the FCC approval of this
device. The phone numbers listed are for
FCC-related questions only and not intended for ques-
tions regarding the connection or operation for this
device. Please contact your cable service provider for
any questions you may have regarding the operation
or installation of this device.
FCC Declaration of Conformity
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1) this device may not cause harmful interference,
and 2) this device must accept any interference
received, including interference that may cause
undesired operation.
EXPLORER
Digital Home Communications Terminal:
Manufactured by: Cisco Systems, Inc.;
5030 Sugarloaf Parkway;
Lawrenceville, Georgia 30044; USA
Telephone 678 277-1120
14
1840
®
Model 1840
Canada EMI Regulation
This Class B digital apparatus complies with
Canadian ICES-003.
Cet appareil numérique de la class B est conforme à
la norme NMB-003 du Canada.
Software and Firmware Use
Cisco Systems, Inc. owns copyrights to the soft-
ware included in your set-top and furnishes the soft-
ware to your cable service provider under a license
agreement. You may only use or copy this software
in accordance with the terms of your cable service
provider.
Cisco Systems, Inc. owns copyrights to the
fi rmware in this equipment. You may only use the
fi rmware in the equipment in which it is provided. Any
reproduction or distribution of this fi rmware, or any
portion of it, without the express written consent of
Cisco Systems, Inc. is prohibited.
Disclaimer
Cisco Systems, Inc. assumes no responsibility for
errors or omissions that may appear in this guide.
Cisco reserves the right to change this
guide at any time without notice.