Conventional Talkgroup Calls (Conventional Operation Only); Select A Talkgroup - Motorola XTSTM 5000 II User Manual

Common Radio Features
Conventional Talkgroup Calls (Conventional
Operation Only)
Talkgroup Call lets you define a group of conventional system users
so that they can share the use of a conventional channel.
Encryption keys are slaved to talkgroups. When talkgroups are
enabled, encryption keys are changed by changing the active
talkgroup. See "Secure Operations" on page 71.

Select a Talkgroup

Press u to find TGRP.
1
Press D, E, or F
2
directly below TGRP. You see
the last talkgroup that was
selected and stored, and SEL
and PSET.
Press v or u to find the
3
talkgroup you want.
Press D, E, or F
4
directly below SEL or PSET.
SEL (SELECT) — Saves the currently displayed talkgroup and
returns to the home display.
PSET (PRESET) — Selects the preset preprogrammed talkgroup.
If the encryption key slaved
to the new talkgroup is
erased, you see KEY FAIL
and hear a momentary key
fail tone.
If the encryption key that is
slaved to the new talkgroup
is not allowed, you see
ILLEGAL KEY and hear a
momentary key fail tone.
64
TGRP
SEL PSET
SEL PSET
KEY FAIL
• Momentary key fail tone
ILLEGAL KEY
• Momentary key fail tone