Send An Emergency Call - Motorola XTSTM 5000 II User Manual

Common Radio Features
2 When you receive the
dispatcher's
acknowledgment, you see
ACK RECEIVED, four tones
sound, the alarm ends, and
the radio exits the emergency
mode.
If no acknowledgement is
received, you see NO
ACKNOWLDG, the alarm ends,
and the radio exits the
emergency mode.
Note: For Emergency Alarm with Emergency Call: The radio
enters the Emergency Call state either after it receives the
dispatcher's acknowledgment, or if you press the PTT button
while in Emergency Alarm. Go to step 2 of "Send an
Emergency Call", below.

Send an Emergency Call

This type of dispatch gives your radio priority access to channels
The radio operates in the normal dispatch manner while in
Emergency Call, except, if enabled, it will return to one of the
following:
• Tactical/Non-Revert — You talk on the channel you selected
before you entered the emergency state.
• Non-Tactical/Revert — You talk on a preprogrammed emergency
channel. The emergency alarm is sent on this same channel.
1 With your radio turned on,
press the Emergency
button.The current zone/
channel is displayed
alternately with EMERGENCY,
and a short, medium-pitched
tone sounds.
36
ACK RECEIVED
• Four tones
• Alarm ends
• Radio exits emergency
NO ACKNOWLDG
• Alarm ends
• Radio exits emergency
EMERGENCY
• Short tone