Setting Up The Channel List - Initial Setup - Sony Bravia KDL-32L4010 Operating Instructions Manual

4. Setting Up the Channel
List - Initial Setup
After you finish connecting your TV, you need
to run Initial Setup, which automatically sets
up available channels. The Initial Setup
screen appears when you turn on your TV for
the first time. If you do not want to set up the
channels at this time, you can do it later by
selecting the Auto Program option in the
Channel menu (see page 34).
POWER
1
Press to turn on the TV.
The Initial Setup screen appears.
Initial Setup
Press to choose a language.
Please select your language:
2
Press V/v to highlight the desired
language, then press
3
Connect cable or antenna, then select Yes
to run Auto Program.
~
• If you want to run Auto Program at a later
time, select No.
• If you have cable and antenna available, please
connect cable first.
• IMPORTANT: You must perform Auto
Program after cable or antenna is connected.
If you cancel Auto Program before
completion, some channels may not be
available.
20
.
4
Follow the help text provided on the
screen to run Auto Program. The Auto
Program will scan for available channels
from the signal source directly connected
to the TV's CABLE/ANTENNA input.
5
When the Auto Program is complete,
select OK to finish the Auto Program
process.
To run Auto Program at a later time
❑
Use the Auto Program feature at
Channel menu as described on page 34.
To display the picture in your preferred
aspect ratio
❑
Select the proper Wide Mode as
described on pages 25 and 33.
~
• You may want to set up convenient features such
as Favorites (see pages 29 and 34),
Show/Hide Channels (see page 34), Label
Channels (see page 35) when Auto Program
is completed.