Getting Started
Setting Up the Channel
List - Initial Setup
Ariel you finish connecting
tile TV, you can run tile Initial Setup to create a
list of available
analog and digital channels.
The Initial
Setup
screen
appears
when you turn on the TV for the first time after booking
it up.
YV POWER
1
Press
(_
to turn on tile TV.
Tile Initial
Setup
screen appears.
2
Press ,I./I!, to highlight
the on-screen
display language.
Then press @.
The
message
"Start auto program
now'?"
appears.
3
Press tl4,!, to h@lhght
Ye.' then press @.
Auto
Program
performed
through
Initial
Setup
will automatically
create a
list of receivable
channels
from both VHF/UHF
antenna
and cable TV
channels
if both sources
are connected.
If you choose to set up the channels
at a later time, select the Auto
Program
option in the Channel
settings
to scan available
channels
(see page 39).
'/_ If you select "No'! during Initial Setup, the Initial Setup screen will
reappear each time you turn on the TV until you complete Auto
Program.
2O