Cisco 7911 User Manual page 4

To enable/modify Call Forwarding from a remote location:

Dial the number for Remote Access to Call Forwarding specified by your Service Provider.

Enter your complete telephone number + #. If your phone is configured as an extension-only (i.e.,
non-DID) line, enter your company's complete main telephone number + * + your extension number +
#.

Enter your telephone password + #

Enter the new forwarding number + #. For external numbers use the Outside Access Digit, usually 9.

After hearing the verification, hang up
To disable Call Forwarding using the menu:

Press the CFwdAll softkey

Press the EndCall softkey
To disable Call Forwarding using Star Codes:

Lift the handset and dial 73*

After hearing the verification, hang up
To disable Call Forwarding from a remote location:

Dial the number for Remote Access to Call Forwarding (provided by your Administrator)

Enter your complete telephone number + #

Enter your telephone password + #

Press ##

After hearing the verification, hang up
Call Forward (Busy)
Call Forward (Busy) forwards calls to another number when you are already on a call.
To enable/modify Call Forward (Busy)

Lift the handset and dial 76*

Enter the extension or phone number for the forwarding destination followed by #. For external
numbers, use the Outside Access Digit.

Press # to confirm followed by 2 to exit

Hang up