Engine Coolant - Honda 2007 Accord Coupe Owner's Manual

Main Menu
Main Menu
RADIATOR CAP
4-cylinder models
1. Make sure the engine and radiator
are cool.
When the radiator and engine are
cool, relieve any pressure in the
cooling system by turning the
radiator cap counterclockwise,
without pressing down.
2. Remove the radiator cap by
pushing down and turning
counterclockwise.
Table of Contents Table of Contents
V6 models
3. The coolant level should be up to
the base of the filler neck. Add
coolant if it is low.
Pour the coolant slowly and
carefully so you do not spill any.
Clean up any spills immediately; it
could damage components in the
engine compartment.
4. Put the radiator cap back on, and
tighten it fully.
4-cylinder models
RADIATOR CAP
5. Pour coolant into the reserve tank.
Fill it to halfway between the MAX
and MIN marks. Put the cap back
on the reserve tank.

Engine Coolant

RESERVE TANK
CONTINUED
237