Honeywell MagicStat T8132 Programming And Installation Instructions page 14

This guide can be used for programming your new thermostat.
NOTE: Batteries are required for operation and programming. When inserting batteries, set
system switch to OFF. Remove battery door (on thermostat left side) using a coin at the bottom.
Follow instructions on pages 6-7.
Set Current Time/Day
To set time, press and release
press and release
Clock/Day
Heating Program
With system switch at HEAT, press and release
appear on display.
Set
once,
Clock/Day
Time
Ahead
Set
again,
Back
Time
Ahead
until current time shows; to set day,
Back
until current day shows; then press
Set
once. "WAKE", Mon-Fri and "SET"
Schedule
12
Run
.
Program