Hard disk drives / solid state drives
7.2.2.3
Removing a 2.5-inch HDD/SSD tray
Figure 65: Removing a 2.5-inch HDD/SSD tray
I
Empty HDD/SSD trays have been installed into unused HDD/SSD bays.
Before installing an additional HDD/SSD, the empty HDD/SSD tray
needs to be removed from the desired drive bay.
Ê Undo the locking mechanism of the release lever (1).
Ê Swing the release lever in the direction of the arrow (2).
Ê Pull out the HDD/SSD tray (3).
104
Upgrade and Maintenance Manual
CX400 S1