Initialization And Notes On Correct Use; Parameter File Setting Dialog Box - NEC Flash Memory Programmer PG-FP3 User Manual

3.3 INITIALIZATION AND NOTES ON CORRECT USE

Before a target can be accessed with FLASHPRO3, several settings must be performed for FLASHPRO3. If these
settings are not done correctly, communication may not be executed correctly or the target may be damaged.
Loading parameter file
The parameter file is loaded with the [Setting..Device] command. If the file is not loaded when FLASHPRO3
starts, settings for the target will not be correctly performed. Consequently, communication may fail or the target
may be damaged.
When this dialog box is opened, enter the parameter file name in response to Device file name:. Alternatively,
click the button to the right to the text box to display a list of parameter files. Select one and click the [OK]
button. The selected parameter file will be loaded.
CHAPTER 3 STARTING AND STOPPING
Figure 3-2. Parameter File Setting Dialog Box
User's Manual U13502EJ2V0UM00
33