Honda 2007 Accord Hybrid Owner's Manual page 242

06/08/08 14:54:09 31SDR620_241
Changing a Flat Tire
WHEEL NUT
WHEEL NUT WRENCH
6. Loosen the wheel nuts 1/2 of a
turn with the wheel wrench.
236
JACKING POINT
Place the jack under the jacking
7.
point nearest the tire you need to
change. Turn the end bracket
clockwise until the top of the jack
contacts the jacking point. Make
sure the jacking point tab is
resting in the jack notch.
EXTENSION
WHEEL WRENCH
Use the extension and the wheel
8.
nut wrench as shown to raise the
vehicle until the flat tire is off the
ground.
9. Remove the wheel nuts, then
remove the flat tire. Handle the
wheel nuts carefully; they may be
hot from driving. Place the flat tire
on the ground with the outside
surface facing up.