Split Call Forwarding - All Calls - NEC Univerge SV8300 User Manual

Single line telephone

Hide thumbs Also See for Univerge SV8300:

Table of Contents

Split Call Forwarding - All Calls

This feature allows all internal and external calls to a

busy extension to be rerouted to different destinations

individually, regardless of the busy or idle status of the

extension. According to the type of incoming call

(Station, C. O. Line, Tie Line, or a call terminated from

internal office or via CCIS), Call Forwarding or Split Call

Forwarding can be selected.

To activate Split Call Forwarding, both Split Call

Forwarding and Call Forwarding settings are required.

For Call Forwarding settings, refer to the description of

Call Forwarding - All Calls on page

To set Split Call Forwarding - All Calls:

Lift the handset and receive dial tone.

Dial the Call Forwarding - All Calls feature access

code and receive feature dial tone.

Dial the desired destination number (0~9) and

To monitor Split Call Forwarding - All Calls:

When Split Call Forwarding - All Calls has been

set, special dial tone is heard, if set by system

programming.

Replace the handset.

Number Destination

Number