Paper Handling - Epson GP-C830 User Manual

Cause
The left or right margin settings are incorrect.
Page length does not match the length of the paper.
Cause
The page length setting in your application may
be incorrect.

Paper handling

Paper loading or feeding problems
The tractor does not feed the paper.
Cause
The paper may have come off the tractor.
The paper supply is obstructed.
The tear-off position is not aligned correctly.
Cause
The tear-off position setting is incorrect.
Paper feeding is crooked or the paper jams.
Cause
The paper supply is too far away from the printer.
The holes on the sides of the paper are misaligned.
GP-C830/GP-M830/GP-C831/GP-M831/GP-C832/GP-M832
What to do
Check and adjust the margin settings in your application. For more
information, see "Printable area" on page 92.
If the settings cannot be changed in your application, adjust the
print position horizontally in the printer driver. For more
information, see "Adjusting the Print Position" on page 36.
What to do
Check the page length setting in your application and adjust it if
necessary.
What to do
Reattach the paper to the tractor.
Make sure the paper supply is not obstructed by a cable or some
other object.
What to do
Adjust the tear-off position using the Micro Adjust function. For
more information, see "Adjusting the tear-off position" on
page 23.
What to do
Make sure that your paper supply is within 1 meter (3 feet) of the
printer.
Check that the holes on the sides of the paper are aligned with
each other. Also, make sure the sprocket units are locked and their
covers are closed.
User's Guide
Troubleshooting 60