Table of Contents
Advertisement
3.
Go to LAN-to-LAN. Click on one index number to edit a profile.
4.
Set Common Settings as shown below. You should enable both of VPN connections
because any one of the parties may start the VPN connection.
5.
Set Dial-Out Settings as shown below to dial to connect to Router B aggressively with
the selected Dial-Out method.
If an IPSec-based service is selected, you should further specify the remote peer IP
Address, IKE Authentication Method and IPSec Security Method for this Dial-Out
connection.
If a PPP-based service is selected, you should further specify the remote peer IP Address,
Username, Password, PPP Authentication and VJ Compression for this Dial-Out
Vigor3100 Series User's Guide
91
Advertisement
Table of Contents
