Filter Setup - Draytek Vigor 3100 Series User Manual

Draytek vigor 3100 series router
Hide thumbs Also See for Vigor 3100 Series:
Table of Contents

Advertisement

Some on-line games (for example: Half Life) will use lots of fragmented UDP packets to
transfer game data. Instinctively as a secure firewall, Vigor router will reject these fragmented
packets to prevent attack unless you enable "Accept Incoming Fragmented UDP Packets". By
checking this box, you can play these kinds of on-line games. If security concern is in higher
priority, you cannot enable "Accept Incoming Fragmented UDP Packets".
3
.
4
.
3
F
i
l
t
e
r
S
e
3
.
4
.
3
F
i
l
t
e
r
S
Click Firewall and click Filter Setup to open the setup page.
To edit or add a filter, click on the set number to edit the individual set. The following page
will be shown. Each filter set contains up to 7 rules. Click on the rule number button to edit
each rule. Check Active to enable the rule.
Filter Rule
Active
Vigor3100 Series User's Guide
Block - All blocked packets will be logged.
Pass - All passed packets will be logged.
No Match - The log function will record all packets that are not
matched.
Note that the filter log will be displayed on the Telnet terminal when
you type the log -f command.
t
u
p
e
t
u
p
Click a button numbered (1 ~ 7) to edit the filter rule. Click the button
will open Edit Filter Rule web page. For the detailed information,
refer to the following page.
Enable or disable the filter rule.
41

Advertisement

Table of Contents
loading

Table of Contents