Using The Face Self-Timer - Canon PowerShot G12 Getting Started

Using the Face Self-Timer

Changing the number of shots
After choosing
• Shutting both eyes will also be detected as a wink.
• If a wink is not detected, the shutter will release approximately 15
seconds later.
• If there are no people in he shot when the shutter button is pressed fully,
he camera will shoot after a person enters he shot and winks.
Using the Face Self-Timer
The shutter will release approximately two seconds after the camera detects
a new face (p. 24). You can use this when the photographer wants to be in
the image, such as a group photo.
70
in Step 1 on p. 69, press the op buttons.
Choose
●
Follow Steps 1 – 2 on p. 62 to choose
then press the l button.
●
Press the qr buttons or turn the Ê dial to
choose
Compose the shot and press the
shutter button halfway.
●
Make sure a green frame appears on the
face focused on and white frames appear
on other faces.
Press the shutter button fully.
X
The camera will enter shooting stand-by,
and [Look straight at camera to start count
down] will appear on the screen.
X
The lamp will blink and the self-timer sound
will play.
.
, then press the l button.
,