NETGEAR GS105PE Installation Manual
Prosafe plus 5-port gigabit poe pass through switch
Hide thumbs
Also See for GS105PE:
- Installation manual (2 pages) ,
- User manual (83 pages) ,
- Installation (2 pages)
Advertisement
Quick Links
Installation Guide
ProSAFE Plus 5-Port Gigabit PoE Pass Through
Switch GS105PE
Step 1. Connect equipment.
Computer
Server
GS105PE switch
PoE Switch
Step 2. Connect power.
GS105PE switch
PoE Switch
PoE PD Port
PoE PSE Port
Step 3. Check status.
Power LED
Port LEDs Left
PoE pass through
1000 Mbps link
enabled
10/100 Mbps link
PoE pass through
disabled
1000 Mbps activity
(blinking)
Off
10/100 Mbps activity
(blinking)
No link (off)
PoE PD (Port 5)
LED Right
Receiving power
from PSE per 802.3at
specification
Receiving power
from PSE
Off
PoE PSE (Ports 1
and 2) LEDs Right
Supplying power
PoE Fault
No PoE Power
PD not deteced
Advertisement
Related Manuals for NETGEAR GS105PE
Summary of Contents for NETGEAR GS105PE
- Page 1 Installation Guide ProSAFE Plus 5-Port Gigabit PoE Pass Through Switch GS105PE Step 2. Connect power. Step 3. Check status. Power LED Port LEDs Left PoE PD (Port 5) Step 1. Connect equipment. LED Right PoE pass through 1000 Mbps link...
-
Page 2: Specifications
NETGEAR, Inc. trademarks of NETGEAR, Inc. and/or its subsidiaries in the United States and/or other 350 East Plumeria Drive countries. Information is subject to change without notice. © NETGEAR, Inc. All rights reserved. November 2013 San Jose, CA 95134 USA...