Common Interface - Samsung BD-F8500 E-Manual

Common Interface

Show common interface menu and application information.
●
CI Menu : This enables the user to select from the CAM provided menu. Select
the CI Menu based on the menu PC Card.
●
CAM video transcoding
codec from the CAM automatically. Turn it Off if you do not want to use it.
"
You must use a CAM that supports transcoding the video codec.
●
Application Info
inserted into the CI. Slot and on the "CI CAM with CI or CI+ CARD" which is
inserted into the CAM. You can install the CAM anytime whether the product
is on or off.
●
CICAM PIN Manager
1.
Purchase a CI CAM at your nearest dealer or by phone.
2.
Firmly insert the "CI CAM with CI or CI+ CARD".
3.
Insert the CAM with the "CI CAM with CI or CI+ CARD" into the common
interface slot, in the direction of the arrow so that it aligns parallel with the
slot.
4.
Check if you can see a picture on a scrambled signal channel.
"
This product works with CI and CI+ CAM. But in case of some local broadcasting
operators, this product may not have perfect compatibility with all kinds of CAM.
"
If the inserted CAM does not operate properly, pull the CAM CARD out of the product
and insert it into the slot again.
"
If a popup message appears, please take a step referring the follows.(This is not a
product malfunction. Please contact your service provider for more information.)
1.
"Wrong smart card inserted." : Smart card is inserted incorrectly.
2.
" Inserted smart card not supported." : Wrong smart card is inserted.
3.
"The credit of your smart card has expired. Your smart card is not authorised
for this service." : The credit of your smart card has expired.
4.
"No smart card is inserted." : Smart card is not inserted correctly.
: You can configure the setting to transcode the video
: View information on the CAM(Conditional Access Module)
: Save or clear CI CAM PIN numbers.
Except for BD-F8900A, F8500A model