D-Link DNS-313 User Manual page 10

Section 2 - Installation
4. Attach the faceplate to the front of the device.
5. Connect an Ethernet cable into the available Ethernet port.
should connect the DNS-313 to your local network or directly to a computer
for configuration.
Note: Should you need to install a new Hard Disk into the DNS-313, you will be required to insert the Ethernet cable between
your DNS-313 and router and run the original DCC installation wizard included in the CD Please do not connect the USB
cable during this step.
6. Finally, connect the power adapter to the power receptacle.
This cable
10