Preparation; Charging The Battery Pack; Preparation Charging The Battery Pack - Sharp ViewCam Slim VL-AX1H Operation Manual

Sharp liquid crystal display camcorder operation manual
Table of Contents

Advertisement

Preparation

Preparation
Charging the Battery
Pack
Charge the battery pack with the supplied AC
adapter/battery charger before use.
Note:
• Remove the DC cable from the AC adapter/
battery charger when charging the battery pack.
1
Connect the supplied power cord to the
AC power socket on the AC adapter/
battery charger, and insert the AC plug
into a power outlet.
• The POWER indicator lights up.
POWER indicator
2
Align the s mark on the battery pack
with the a mark on the charger (1) and
guide the battery into the groove.
Pressing the battery (2), slide it in the
direction of the arrow (3) until it locks
into place.
• The CHARGE indicator lights up.
CHARGE indicator
• The CHARGE indicator turns off when
the battery is fully charged.
3
Slide the battery pack in the direction of
the arrow (1), and remove it (2). Then
remove the AC plug of the power cord
from the power outlet.
9
VL-AX1H-009-021
AC power socket
To power
outlet
9
Charging time and maximum continu-
ous recording and playback times in
TAPE modes
Max. continu-
ous recording
Battery
Charging
time
pack
time
LCD
closed
BT-L221
100
110
BT-LS222
BT-L441
160
220
BT-LS442A
190
260
• The chart specifies the approximate times in
minutes.
Notes:
• Charge the battery pack between 10°C and
30°C. The battery pack may not charge
properly at temperatures too low or too high.
• The battery pack and charger become warm
during charging. This is not a malfunction.
• Using the zoom (see page 24) and other
functions or turning the power on and off
frequently will increase power consumption.
This may result in a decrease in the actual
recording time compared to the maximum
continuous recording time listed above.
• The charging time and recording time may
vary depending on the ambient temperature
and the condition of the battery pack.
• See pages 97 and 98 for more information on
using the battery pack.
Caution:
• Charge only SHARP model BT-L221, BT-L441,
BT-LS222 or BT-LS442A battery packs. Other
types of battery packs may burst, causing
personal injury and damage.
01.11.1, 11:00 AM
Max. continu-
ous playback
time on LCD
LCD
open
90
90
180
180
220
220

Advertisement

Table of Contents
loading

Table of Contents