OR
Wait until all Bluetooth devices in range have been scanned and the Scan Dialog window appears.
6. Scroll through the list until your Bluetooth printer device is found. You may select any device in the
list to display its MAC address.
7. Highlight the Bluetooth printer device and select the Select button.
8. When the COM port selection appears, select COM7 and select OK.
9. If successful, the COM port and MAC address of the device appears under the list of Registered
Bluetooth Virtual COM ports.
10. Select OK to exit the Bluetooth Handler.
11. One of the ways to test the connection to the printer is to follow the steps below:
a. Select Start -> Programs -> Demos -> Print Demo.
b. Select Zebra (BT) Barcodes Print.
c. If the connection is successful, the bar code prints.
8 - 2