Internet Explorer Setting
Settings (continued)
Protocol Page
This page sets the protocol.
This page can be used during access using AadminB.
Click [Advanced Settings] and [Protocol].
Memo:
● Press the [OK] button to enable the new settings.
● If the [OK] button is pressed upon entering an invalid value, a warning message will appear and the
entry will be denied. Press the [Cancel] button to restore the invalid entry to the value before the
change was made. If you press the [Cancel] button, other changed items will also be restored to the
values before the change was made.
● When you connect via Internet Explorer after changing protocol settings, enter the address using
the new server port and port number in the address bar.
● For protocol settings when using HTTPS with SNMP, see "HTTPS and SNMP Function Update
Procedure". (A Page 112)
A
Server Certificate
Information
Create Server Certificate
B
Protocol Settings
HTTP/HTTPS
54
Specifies settings related to server certificates.
Displays valid server certificates.
Displays the screen for entering information required to create a
server certificate.
Sets protocols.
Select the protocol to use.
[Set values: HTTP, HTTPS]
* The [Set values] in bold letters are factory defaults.
A
B
C
D