Toshiba 40E200U1 Owner's Manual page 34

To select the picture size using the menus:
1
Select
Picture Size
in the
Theater Settings
menu.
2
Press .... or
~
to select the desired picture size
setting.
3
Highlight
Done
and press
@.
Note: Some of the picture sizes may not be
available depending on the receiving signal
format (those will be "grayed out" in the Picture
Size screen).
Using these functions to change the picture
size (i.e., changing the height! width ratio)
for any purpose other than your private
viewing may be prohibited under the
Copyright Laws of the United States and
other countries, and may subject you to civil
and criminal liability.
Note: If you select one of the TheaterWide®
picture sizes, the top and bottom edges of the
picture (including subtitles or captions) may be
hidden. To view the hidden edges, either scroll
the picture (TheaterWide 2 and 3 only) or try
viewing the program in Full or Natural picture
size.
Natural
100
01~10
001
000 000
Some program formats will display with sidebars
and/or bars at the top and bottom.
TheaterWide 1
(for 4:3 format programs)
1000HOOOI
000 0 0 0
The center of the picture remains close to its original
proportion, but the left and right edges are stretched
wider to
fill
the screen.
I
34
TheaterWide 2
(for letter box programs)
loooHOOOI
000
0 0 0
The top and bottom edges of the picture may be
hidden*.
TheaterWide 3
(for letter box programs with
subtitles)
[9,,8 g)~[S?"
g
?]
The top and bottom edges are hidden*.
Full
(for 16:9 [480i, 480p] source
programs only)
IOOOHOOOI
000 0 0 0
• If receiving a squeezed 4:3 format program, the
picture is stretched wider to
fill
the width of the
screen, but not stretched taller.
• None of the picture is hidden.
4:3 HD
(for 720p, 1080i, and 1080p program
sources only)
100
01~10
0
01
0 0 0
000
Picture is not distorted from original size.
(continued)