Memory - Miele Dishwasher Operating Instructions Manual

Additional functions

Memory

You can use the Memory function to
save the last programme selected.
Instead of the indicator light for the
ECO programme, the indicator light for
the last programme selected will come
on when the dishwasher is switched off
and back on again at the end of a
programme.
^ Open the door.
^ Switch the dishwasher off using the
On/Off button K.
^ Press the Programme selector button
in, and whilst holding it in switch
the dishwasher on using the On/Off
button K.
Keep the programme selector button
pressed in until the lower right hand
programme indicator comes on.
If this does not happen, start the
procedure again from the beginning.
^ Press the Turbo button six times.
The Turbo indicator will flash briefly 6
times at intervals.
50
The flashing sequence in the display
shows what the current setting is.
– "p 1": The Memory function is
activated.
– "p 0": The Memory function is
deactivated.
^ If you want to change the setting,
press the Programme selector
button.
The setting is now stored in memory.
^ Switch the dishwasher off using the
On/Off button K.