Maintenance - DeWalt DC608-XE Instruction Manual

The D WALT cordless nailers include an integrated suspension hook (I) and can be
E
attached to either side of the tool to accommodate left- or right-handed users.
If the hook is not desired at all, it can be removed from the tool.
TO REMOVE SUSPENSION HOOK
1. Remove battery pack from tool.
2. To switch the tool from right- to left-hand usage simply remove the screw and
reassemble on the other side.
3. Replace battery pack.

MAINTENANCE

WARNING: To reduce the risk of serious personal injury, disconnect battery
pack from tool before making any adjustments, changing accessories, servicing,
or moving the tool. Such preventative safety measures reduce the risk of starting the
tool accidentally.
Daily Maintenance Chart
ACTION Clean magazine, pusher, and contact trip mechanism.
WHY Permits smooth operation of magazine, reduces wear, and prevents
jams.
HOW The use of oils, lubricants periodically or solvents is not recommended
as they tend to attract debris.
ACTION Before each use, check to insure all screws, nuts and fasteners are
tight and undamaged.
WHY Prevents jams and premature failure of tool parts.
HOW Tighten loose screws or other fasteners using the appropriate Allen
wrench or screwdriver
Cleaning
WARNING: To reduce the risk of serious personal injury, disconnect battery pack
from tool before cleaning and inspection. Make sure tool is in proper working
condition before placing the tool back in use or serious personal injury may result.
CAUTION: When cleaning, use only a damp cloth on plastic parts. Many household
cleaners contain chemicals which could seriously damage plastic parts. Also, do not
use gasoline, turpentine, lacquer or paint thinner, dry cleaning fluids or similar
products which may seriously damage plastic parts. Never let any liquid get inside
the tool; never immerse any part of the tool into a liquid.
CHARGER CLEANING INSTRUCTIONS
WARNING: To reduce the risk of personal injury, disconnect the charger from the
AC outlet before cleaning. Dirt and grease may be removed from the exterior of the
charger using a cloth or soft non-metallic brush. Do not use water or any cleaning
solutions
Lubrication
CAUTION: NEVER spray or in any other way apply
lubricants or cleaning solvents inside the tool. This can seriously
affect the life and performance of the tool.
D WALT tools are properly lubricated at the factory and are
E
ready for use. However, it is recommended that, once a year, you
take or send the tool to a certified service center for a thorough
cleaning and inspection.
Repairs
WARNING: To reduce the risk of serious personal injury, remove nails from
magazine before making any adjustments or servicing this tool.
To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment
(including brush inspection and replacement) should be performed by a D
factory service center, a D WALT authorized service center or other qualified service
E
personnel. Always use identical replacement parts. Refer to the Troubleshooting
Guide at the end of this section.
ACCESSORIES
WARNING: Since accessories, other than those offered by D
tested with this product, use of such accessories with this tool could be hazardous.
To reduce the risk of injury, only D WALT, recommended accessories should be used
E
with this product.
14
WALT
E
WALT, have not been
E