Cisco IP Phone Administration Manual page 18

Understanding the Cisco Unified IP Phone 7962G and 7942G 7962G, 7942G, 7961G, 7961G-GE, 7941G, and 7941G-GE
Figure 1-4
Table 1-1
Table 1-1 Features on the Cisco Unified IP Phones 7962G, 7942G, 7961G, 7961G-GE, 7941G, and 7941 G-GE
1 Programmable buttons
2
Phone screen
3
Footstand button
4
Messages button
5 Directories button
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
1-4
Cisco Unified IP Phone 7941G and 7941G-GE
16
15 14
describes the buttons on the Cisco Unified IP Phone 7962G and 7942G.
Depending on configuration, programmable buttons provide access to:
Phone lines (line buttons)
•
Speed-dial numbers (speed-dial buttons, including the BLF speed-dial feature)
•
Web-based services (for example, a Personal Address Book [PAB] button)
•
Phone features (for example, a Privacy button)
•
The buttons illuminate to indicate status:
Green, steady—Active call
Green, flashing—Held call
Amber, steady—Privacy in use
Amber, flashing—Incoming call
Red steady—Remote line in use (shared line, BLF status, or active Mobile Connect
call)
Shows phone features.
Allows you to adjust the angle of the phone base.
Dials your voice-message service automatically (varies by service).
Opens/closes the Directories menu. Use the button to access call logs and directories.
2 1
1
13 12 11 10
Chapter 1 An Overview of the Cisco Unified IP Phones
3
4
5
6
7
8
9
OL-23091-01