Cisco IP Phone Administration Manual page 124

Telephony Features Available for the Cisco Unified IP Phone
Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature
Automatic Port
Synchronization
Barge (and cBarge)
Block external to
external transfer
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
5-4
Description
When the Cisco Unified CM administrator uses the
Remote Port Configuration feature to set the speed
and duplex function of an IP Phone remotely, loss
of packets can occur if one port is slower than the
other.
The Automatic Port Synchronization feature
synchronizes the ports to the lowest speed among
the two ports, which eliminates packet loss. When
automatic port synchronization is enabled, it is
recommended that both ports be configured for
autonegotiate. If one port is enabled for
autonegotiate and the other is at a fixed speed, the
phone synchronizes to the fixed port speed.
If both the ports are configured for fixed
Note
speed, the Automatic Port Synchronization
feature is ineffective.
The Remote Port Configuration and
Note
Automatic Port Synchronization features
are compatible only with IEEE 802.3AF
Power of Ethernet (PoE) switches.
Switches that support only Cisco Inline
Power are not compatible. Enabling this
feature on phones that are connected to
these types of switches could result in loss
of connectivity to Cisco Unified CM, if the
phone is powered by PoE.
Allows a user to join a non-private call on a shared
phone line. Barge features include cBarge and
Barge.
cBarge adds a user to a call and converts it into
•
a conference, allowing the user and other
parties to access conference features.
Barge adds a user to a call but does not convert
•
the call into a conference.
The phones support Barge in two conference
modes:
Built-in conference bridge at the target device
•
(the phone that is being barged). This mode
uses the Barge softkey.
Shared conference bridge. This mode uses the
•
cBarge softkey.
Prevents users from transferring an external call to
another external number.
Chapter 5 Configuring Features, Templates, Services, and Users
Configuration Reference
To configure the parameter in the Cisco
Unified CM Administration application,
choose Device > Phone, select the appropriate
IP Phones, and scroll to the Product Specific
Configuration Layout pane.
To configure the setting on multiple phones
simultaneously, enable Automatic Port
Synchronization in the Enterprise Phone
Configuration (System > Enterprise Phone
Configuration).
For more information, see:
Cisco Unified Communications Manager
•
Administration Guide,
Phone Configuration.
Cisco Unified Communications Manager
•
System Guide,
Cisco Unified Communications Manager
•
Features and Services Guide,
Privacy.
For more information, see Cisco Unified
Communications Manager Features and
Services Guide, External Call Transfer
Restrictions.
Cisco Unified IP
Cisco Unified IP Phones.
Barge and
OL-23091-01