Display Contrast; Local Area Code; Ringer Level - GE 27958 User Manual

D C
ISPLAY ONTRAST
NOTE: This setting may only be made with the base.
1. Press the flash/program button until SET CONTRAST shows in the
display. " 2 " is the default setting.
2. Press 1, 2 or 3 on the base touch-tone pad to enter your selection, or use the
MESSAGES/CID (
3. Press flash/program again to store your selection.
NOTE: You can press flash/program at any time to go to the next option. To
exit the menu, press flash/program repeatedly.
L A C
OCAL REA
NOTE: This setting may be made with the base or the cordless handset.
1. Press the flash/program button until SET AREA CODE - - - shows in the
display. - - - is the default setting.
2. Use the cordless handset or base number pad to enter your three digit
area code.
3. Press flash/program again to store your selection.
NOTE: You can press flash/program at any time to go to the next option. To
exit the menu, press flash/program repeatedly.
R L
INGER EVEL
NOTE: This setting may only be made with the base.
1. Press the flash/program button until SET RING LEVEL shows in the
display. 1 HI is the default setting.
2. Press 1, 2 or 3 on the base touch-tone pad to enter your selection, or use
the MESSAGES/CID (
3. Press flash/program again to store your selection.
NOTE: You can press flash/program at any time to go to the next option. To
exit the menu, press flash/program repeatedly.
12
or ) button on the base to scroll to your selection.
ODE
or ) button to scroll to your selection.