Table of Contents
Advertisement
Main Menu
Cooling System
RADIATOR CAP
2.
Turn the radiator cap counter-
clockwise, without pressing down
on it, until it stops. This relieves
any pressure remaining in the
cooling system.
3.
Remove the radiator cap by
pushing down and turning
counterclockwise.
226
Maintenance
Table of Contents
4.
The coolant level should be up to
the base of the filler neck. Add
coolant if it is low.
Pour the coolant slowly and carefully
so you do not spill. Clean up any
spills immediately. Spilled coolant
could damage components in the
engine compartment.
5.
Put the radiator cap back on.
Tighten it fully.
RESERVE TANK
6.
Pour coolant into the reserve tank.
Fill it to halfway between the MAX
and MIN marks. Put the cap back
on the reserve tank.
Do not add any rust inhibitors or
other additives to your vehicle's
cooling system. They may not be
compatible with the coolant or
engine components.
Advertisement
Chapters
Table of Contents
