Changing Dsmobilecapture Scan Settings (For Macintosh); Image Settings - Brother DS-820W User Manual

Scan Using Your Computer

Changing DSmobileCapture scan settings (for Macintosh)

Image settings

Click the Image tab to choose image type and to set basic scan settings.
(1)
(6)
(7)
(8)
(1) Image Selection Box
(2) Brightness
(3) Contrast
(4) Resolution
(5) Invert
(6) Page Size
(7) Profiles
(8) Default
(9) Preview Window
Choose the colour mode of document you want to scan.
Adjusts the lightness or darkness of an image. The range is from -100 to +100. The
factory default is 0.
Adjusts the range between the darkest and the lightest shades in the image. The
range is from -100 to +100. The factory default is 0.
Determine the quality of the scanned image. The factory default is 200 dpi.
Reverse the brightness and the colours in the image.
Page Size allows you to capture a portion of the scanned document. Choose your
paper size from the Page Size pop-up list.
Save or change the scanning setting in the dialog box of Scanner Properties.
Reset values in this and all other tabs in the properties dialog box to the original
factory settings.
Click to preview your image before scanning. This preview image helps you define
your scan area.
When you click Preview, scanning for the preview starts and the scanned image
will appear in the Preview Window. Note that the scanned image is only for the
preview and will not be saved.
(2)
(3)
(4)
(5)
(9)
35
5