Advanced Setup; Power Mode Setup - Honeywell Tuxedo User Manual

Advanced Setup

The Advanced Setup screen allows access to the Output Setup menu.
Output Setup Function
The Output Setup function allows you to disable Output selection. There are a maximum of 18 outputs that can be enabled or
disabled. To set the Output Setup function, do the following:
ICON
1. Press the System Setup and Advanced Setup
icon.
2. Enter your Authorized Code, if required.
3. Press the Output Setup icon.
4. Highlight the Output selection on the screen
and press the Disable or Enable button to
change the setting.
5. Press Apply.
Output Setup Icons
Apply
OK

Power Mode Setup

Power Setup Mode allows you to reduce power consumption in the event of a system trouble such as AC Loss or Panel Low
Battery. To access Power Mode Setup, from the Home screen do the following:
ICON
1. Press the Setup icon and then the System
Setup icon.
2. Press the Power Mode Setup icon.
3. Enter your Authorized Code, if required.
4. Select Power Save Mode to enable; then choose
from the options.
5. Press Apply to save settings.
User System Setup (cont'd)
ACTION
Back
Home
ACTION
NOTES
This is a local setting for the graphic keypad. If user has the maximum
number of keypads on the system, and wants to disable the same output for
all, each keypad needs to be set individually.
A confirmation window is displayed stating:
"Information
Settings saved"
.
Press OK to save the setting
If the Back icon is pressed, a confirmation window appears stating:
"Output Settings changed. Do you want to save new settings?"
Select Yes or No.
NOTES
Select from:
•
Turn-off Network
•
Override Display Settings
32